About Us | Prominent Veneer Manufacturer in India

Store Locator

Looking for a century Veneers store near you? Find the nearest store and contact them for any support.

Find store

12 Location found in Andhra Pradesh

Datapro Computers Private Limited

#92, 3rd Floor, HJS Chamber, Next to Pride Hotel, Richmond Road, Bengaluru-560025

Vijay Vineel : 9493303201
Datapro Computers Private Limited

#92, 3rd Floor, HJS Chamber, Next to Pride Hotel, Richmond Road, Bengaluru-560025

Vijay Vineel : 9493303201
Datapro Computers Private Limited

#92, 3rd Floor, HJS Chamber, Next to Pride Hotel, Richmond Road, Bengaluru-560025

Vijay Vineel : 9493303201
Datapro Computers Private Limited

#92, 3rd Floor, HJS Chamber, Next to Pride Hotel, Richmond Road, Bengaluru-560025

Vijay Vineel : 9493303201

Senzurastyles Advantages

WHAT MAKES SENZURASTYLES SO SPECIAL

Uniform Drying
- Sliced veneers that may carry high moisture content are subjected to a consistent low temperature drying process so that an optimum-controlled moisture level (10% - 12%) is maintained in the dried veneers
  Advantages Low temperature dry prevents corrugation (i.e. waviness/unevenness) in dried veneers Consistent drying maintains the surface quality of dried veneers, preventing them from splitting or tearing apart No fungus accumulation Increases the lustre of the venner
Precise Edge Cutting & Sorting
- Edge-cutting of dried veneers is done through machines equipped with the latest german technology. Comprehensive and exhaustive manual sorting is then under taken on these veneers
  Advantages A detailed and accurate sorting methodology leads to consistency of design and patterns Advanced cutting equipment ensures accurate edges of dried veneers which in turn leads to immaculate joining
Seamless joining
- Joining of sorted veneers is done by careful hand-splicing through adhesive and one-sided paper tape
  Advantages A thorough hand splicing ensures there are no gaps or overlaps between the veneer flitches The manual process prevents the appearance of zig-zag marks on the surface of the veneer due to heat orchemical reaction of an automated process
Impeccable Assembly
- A special adhesive is applied to the ply back and the veneer is pasted on the same. The assembly is hot pressed to make an aesthetic decorative veneer of supreme quality
  Advantages During assembly, the portion where adhesive is applied and penetrates becomes borer and termite resistant*
Excellent Finishing & Inspection
- Assembled end-product is then carefully sanded, followed by a diligent quality inspection process
  Advantages Pre-sanded material ensures a smooth surface such that the polishing can be suitably done on the veneer surface later Pre-sanded veneers significantly save time and make the final product less labour-intensive and more cost effective A meticulous quality inspection process ensures a superlative final product