Industry Norms
Test Results
Thickness
1.0 mm (± 5%)
1.5 mm (± 10%)
Resistance to surface wear
≥ 400 (revolutions)
> 400 (revolutions)
Resistance to immersion in boiling water Mass increase (%)
6.0% (Max)
5.5% (Max)
Resistance to immersion in boiling water Thickness increase (%)
7.0% (Max)
6.0% (Max)
Resistance to dry heat 180º C
Passed
Passed
Dimensional stability at deviated temperature Longitudinal (%)
0.35% (Max)
0.30% (Max)
Dimensional stability at deviated temperature Transverse (%)
0.75% (Max)
0.65% (Max)
Dimensional stability at 20º C Longitudinal (%)
0.275% (Max)
0.23% (Max)
Dimensional stability at 20º C Transverse (%)
0.48% (Max)
0.28% (Max)
Resistance to impact by small diameter ball
25N (Min)
30 N (Min)
Resistance to cracking
Passed
Passed
Resistance to scratching
3N (Min)
3N (Min)
Resistance to staining
Passed
Passed
Resistance to colour change In Xenon light
Passed
Passed
Resistance to colour change In Enclosed Carbon ARC light
Passed
Passed
Resistance to cigarette burns
Passed
Passed
Resistance to steam
Passed
Passed
Appearance
No ABC Defects
No ABC Defects
Specific gravity gm/c.m3
1.36 (Min)
1.40 (Min)
This is the 0.8mm laminates range from the house of CenturyPly
A fabulous collection from the house of CenturyLaminates offers: Greater Power to Resist Abrasion
Higher Colourfastness Best bonding with substrates due to A Very Uniform & Superior Sanding
Product confirms to International Standards set by ISO 4586-1 & IS 2046
All sheets are marked with "ISI" license No. CM/L 5237965
