//
Time Spent
Scrolling
Mouse Clicks
Button Clicks
Link Clicks
Mouse Movement
Key Presses
Please carefully choose your exact city location from the provided list. If your city is not listed, it means we're currently unable to deliver to your area.

Choose a Delivery Location
It makes easier for you to find the items that can be delivered when and where you want them. You can use the delivery location selector to change your preferred delivery location.

Any Question? Call Us 1800 5722 122
About Us
PRODUCT
Doors
SKU No.: Club Prime Doors
0 Review
Write a review
  • Description
  • Specifications
  • Reviews (0)
  • Enquiry Form

Club Prime Doors are Boiling Water Proof (BWP) doors of the highest quality that act as excellent insulators against dust, heat and noise. Made from the finest quality timber for high resistance and quality, these flush doors are extremely durable and come with our patented Glue Line Internal Protection that make them 100% borer and termite proof.

  • Years of Warranty 10 Years
  • Bend Proof
  • Slam Proof
  • Strength

Available in:

  • 25 mm
  • 30 mm
  • 32 mm
  • 35 mm
  • 38 mm
  • 40 mm

Our USPs

  • Borer & Termite Proof
  • Boiling Water Proof
  • Slam Proof
  • Swell Proof
  • Bend Proof

Tests IS 2202 (Part 1) Requirements Observation
Wrokmanship and Finish Satisfactory Satisfactory
   
Dimensions and Squareness Test
Length and Width within a limit 5 mm (+/-) Length = +/- 4 mm Width = +/- 4 mm
Thickness within limit of 1 mm (+/-) Thickness = +/- 0.8 mm
Door Shutter shall not deviate by more than 1 mm Within limit
General Flatness Test Twist, Cupping, Warping not more than 6 mm Within Limit
Local Planeness Test Depth of deviation not greater than 0.5 mm Within Limit
Impact indentation Test Not more than 0.2 mm 0.2 mm
  Flexure Test
Residual Deflection should not be more than 1/10th of Maximum deflection Within Limit
Deflection at max load should not be more than 1/30 of length and 1/15 of width Within Limit
   
Edge Loading Test
Deflection of the edge at the maximum load should not be more than 5.0 mm 4.50 mm
Residual deflection should not be more than 0.5 mm Within Limit
Lateral buckling should not be more than 2 mm during loading 1.50 mm
Shock Resistance No delamination should be observed due to light and heavy body impact No Delamination
  Buckling Test
Residual deformation should not be more than 5.0 mm 4.00 mm
Initial deflection should not be more than 50.0 mm 40.00 mm
Slamming Test Shall not have any visible damage No Damage
Misuse Test There shall not be any permanent deformation No Deformation
End Immersion There shall be no delamination No Delamination
Knife Test Excellent or Minimum Pass Standard Excellent or Minimum Pass Standard
Glue Adhesion Test No delamination shall occur in glue line No Delamination
Screw Withdraw Resistance Test Not less than 1000 N 1500 N
x

Forgot Password

Register

Are you interested in receiving updates from us through SMS or Email?

X

You can't add more than 50

X

write a reviews