|
|
 |
| |
| Home >
Products >
Centuryply Flexomica |
|
|
|
FLEXO MICA
is a hi-tech Post Forming
Laminate manufactured with
state-of-the-art infrastructure
and technology. The best of raw
materials go into making Centuryply Flexomica. The manufacturing
process is monitored by
automatic electronic systems
ensuring the highest quality of
flexible laminates. With
superior sanding and consistent
thickness, Centuryply Flexomica has
unique aesthetic appeal and is
available in a wide range of
designs.
HOW TO
USE CENTURYPLY FLEXOMICA ?
SUBSTRATE PREPARATION: Prepare
the correct profile of the edge
of the substrate. The profile
should be uniform along full
length of the substrate. It must
be smooth to a desired radius
having no sharp edges.
LAMINATE PREPARATION: Cut
the laminate to the desired
sizes, file and clean the edge
of Centuryply Flexomica to remove
chips and small cracks.
GLUING: Apply the glue
uniformly on both the contact
surfaces to maintain uniformity
an d avoid lumps. This should be
done preferably with the help of
a spray gun. Recommended
adhesives to be used are PVAC or
UF.
FORMABILITY: Heat the
area to be bent to the
recommended temperature. Bend
immediately maintaining the
contact temperature. Recommended
temperature 150o ±5o C. Bending
time 25-30 seconds.
BALANCING LAMINATE: When
the post Forming procedure gets
over, cover the uncovered
portion of the substrate to
balance the job and to avoid
warping.
|
| |
| |
 |
 |
 |
|
| |
Heating Laminate |
Post Forming Backsplash |
Gluing and Inserting
Cove Stick |
|
|
|
|
| |
|
Product Specifications |
| Thickness |
0.6mm and
0.7mm
|
| Size |
1220 mm x 2440
mm
|
| Surface
Finishes |
Suede, Natural
& Matt
|
| Conformity |
IS 2046: 1995
& NEMA LD3 2000
|
| Shelf
Life |
96 Weeks from
the date of manufacture. However, the best results when used within 24
weeks.
|
|
| RANGE: |
|
The
following is our range in post forming laminate:
127, 1673, 221, 311, 318, 351, 363, 448
We can also offer other designs of CENTURYPLY MICA provided we get
sufficient minimum order. |
|
|
Technical Specification for
Centuryply Flexomica |
|
Properties |
Specified as per IS: 2046-1995
HGP
|
Centuryply Flexomica 0.6mm |
|
Thickness |
0.6mm (± 10%)
|
0.6mm
(± 5%) |
|
Resistance to surface wear |
350 (revolutions)
|
>350
(revolutions) |
Resistance to immersion
in boiling water
- Mass increase (%)
- Thickness increase (%) |
22.0% (Max)
24.0% (Max)
|
18% (Max)
20% (Max)
|
Resistance to dry heat
At 180oC |
Should pass test
|
Passed |
Dimensional stability
at
deviated temperature
- Longitudinal (%)
- Transverse (%) |
0.75% (Max)
1.25% (Max)
|
0.55% (Max)
0.95% (Max)
|
Resistance to impact by
small
diameter ball |
20N (Min)
|
>20N |
|
Resistance to cracking |
Should pass test
|
Passed |
|
Resistance to
scratching |
2N (Min)
|
>2N |
|
Resistance to staining |
Should pass test
|
Passed |
Resistance to color
change
1. In Xenon light
2. In enclosed Carbon ARC light |
Wool Standard
Should pass test
Should pass test
|
Passed
Passed |
|
Resistance to cigarette
burns |
Should pass test
|
Passed |
|
Resistance to steam |
Should pass test
|
Passed |
|
Appearance |
No ABC Defects
|
No ABC Defects |
|
Specific gravity gm/cm3 |
|
1.40 (Min) |
|
Formability radius ( min ) mm |
15 |
6 |
|
Time to Blister ( t2- t1 ) Sec. Min |
15 |
30 |
|
Formability |
Heat the area to be bent to the recommended
temperature 150 - 160°C.Bend immediately maintaining the contact
temperature. Bending time 25 -30 seconds. |
|
|
|
|
|
|
|
|
